Custom Massage
Massage Programs and Selections
Press Power button to switch on the controller.
Brookstone Recover
TM
3D Massage Chair will recline to its
ready position and the LCD on the controller will light up. If
no selection is made after 3 minutes, the chair will go into
sleep mode and the LCD light will go off.
There are 7 types of custom back massages. Select the
custom massage button:
Roll/Knead
- Press once for Rolling Massage; twice for
Kneading Massage. Pressing again will shut off the program
Shiatsu
- Turn Shiatsu Massage On/Off
Shiatsu & Tap
- Turn Shiatsu & Tapping Massage On/Off
Tapping
- Turn Tapping Massage On/Off
Clap/Thai
- Press once for Clapping Massage; twice for Thai
Massage. Pressing again will shut off the program
The massage type selected will illuminate on the LCD.
Recline
Press and hold the up or down arrow to move the backrest
of the massage chair to the desired position.
Foot
Press and hold the up or down arrow to move the foot rest
of the massage chair to the desired position.
Adjust
While the rollers are moving, press and hold the up or down
arrow to move the massage rollers to the desired location.
Air Zone
Use to select where you would like the air cells to massage.
Each press of the button will show the corresponding
location on the LCD screen.
Note
You may select and combine your favorite massage areas by pressing the custom
massage buttons.
• Keep each massage session to no
longer than 20 minutes.
• Do not massage any particular area
of the body for more than 5 minutes.
Zone
Adjusts which areas you want to focus your back & seat
massage. Each press cycles through Back, Waist, Seat, Back
& Waist, Waist & Seat and Whole Body.
Roller Width
Press to adjust massage roller widths. Repeated
pressing will cycle through Narrow, Medium and Wide. This
function is only available in rolling modes.
Node Speed
Press to increase the frequency of roller kneading & tapping.
Each press will cycle through Slow, Medium and Fast.
18
