11
USINg aUX-IN
1 . Connect the Audio Output jack of your audio source to the AUX-IN port on the
back of the unit, using a 3 .5mm audio cable (not included) .
2 . Press the POWER button to turn the unit on . The POWER LED will illuminate .
3 . Turn your audio source on and operate it as usual . The sound from the audio
source will be heard through the speaker of the unit .
4 . Press the VOLUME
—
or
+
button to adjust the volume level .
5 . To turn the unit off, press and hold the POWER button until the LED turns off .
Note: If you are connected to the headphone jack on the external device,
you may need to adjust both the unit’s volume and the external device’s
volume to reach the desired sound level.
Note: When an iPad is docked and an auxiliary device is connected to the
aUX-IN port, the sound from the auxiliary device will be heard through the
speaker of the unit. remove the 3.5mm audio cable to listen to the iPad
through the speaker of the unit.
