Note:
• The mono/stereo function maximizes the sound when using multiple
speakers with the same transmitter. To use this fuction, slide MONO/
STEREO to the STEREO position.
• If signal interference occurs, adjust the channel on the transmitter.• When
not in use, press on the speaker to turn off the power
and slide CHANNEL/OFF/1/2/3 on the transmitter to the “Off” position.
CARE AND MAINTENANCE
Wipe the transmitter and speakers with a soft, damp cloth. Do not use
abrasive chemicals.
• Do to the unit's software, you may need to turn
your audio source off, then on again when using
the unit for the first time.
• Ensure the transmitter and speaker(s) are set to
the same channel.
2. Slide CHANNEL/OFF/1/2/3 on the transmitter
to channel 1, 2 or 3. The TRANSMITTER POWER
INDICATOR illuminates.
3. Remove the speaker(s) REAR COVER. See Figure 1.
4. Slide CHANNEL 3/2/1 on the speaker(s) to the same
channel selected on the transmitter.
5. Press on the speaker(s). The speakers’ POWER
INDICATOR illuminates.
6. Press
or
to adjust the speaker(s) volume
to your desired listening level.
11
10
Figure 1
