Connect wires in footrest.
Connect footrest wire connector and screw the caps tight. Then connect the air
hose.
Caution:
After the wire connector has been connected the cap must be screwed tight.
6
Fully connect the footrest to the base.
Move the footrest closer to the chair. Engage the joints of the
footrest and base. Lift footrest up to align the holes on the joints, then insert the bolt and lock it with cotter pin
(that you had set aside).
7
Open box 2.
Take the footrest out of the box and remove the cotter pin and bolt and put it aside.
4
Connect footrest to base.
Move the footrest close to the chair. Engage the link rod with the footrest joint, then
insert the bolt and lock with the cotter pin.
5
Locate the link rod
Locate the cotter pin and bolt