9
calIbRaTe
To get the best material recognition results, please follow the steps below before
first use and periodically during the Scanner’s life .
1 . Remove the film on the front and back of the CALIBRATION SHEET before use .
2 . Make sure the CALIBRATION SHEET is clean and free of dust before use .
3 . Tap the Settings icon in the top right hand corner of your device’s screen .
4 . Choose Calibrate .
5 . Adjust the PAPER GUIDES to center the CALIBRATION SHEET, and
to ensure it will load straight into the FEED SLOT .
6 . Insert the CALIBRATION SHEET, with the printed side facing UP and
the arrow facing the Scanner, into the feed slot .
7 . Tap the Calibrate button on your device’s screen to begin calibration .
8 . The CALIBRATION SHEET will pull through the FEED SLOT while adjusting
the calibration of the Scanner . The sheet will come out of the EXIT SLOT
when calibration is complete .
9 . The screen will return to the Scan screen and show the message
“Calibration Done” . Tap the “OK” button .
