6
syncing The bluetooth To your ipad Tablet
1 . Power on your iPad Tablet .
2 . Slide the On/Off switch on the Bluetooth Keyboard Case to “on” .
Both the Bluetooth LED and the power LED illuminators will light up
for a few seconds and then shut off .
3 . Press the Connect button on the Bluetooth Keyboard Case . The Power LED
will illuminate and the Bluetooth LED will flash .
4 . Select the “Settings” icon on your iPad Tablet’s screen .
5 . Locate and select “Bluetooth” in your iPad Tablet
’
s “General” menu .
6 . Under “Devices” on your iPad Tablet, select the Bluetooth Wireless Keyboard .
7 . The iPad Tablet will now prompt you to enter your tablet Bluetooth password and
press either the Return or Enter key using the Bluetooth Keyboard Case .
8 . The iPad Tablet screen should now show the Bluetooth Wireless Keyboard has
connected successfully .
9 . The Power LED will remain illuminated while the keyboard is powered on .
10 . Slide the On/Off switch to “off” when you are done using the keyboard .
11 . If your iPad Tablet goes into standby mode, the Bluetooth Keyboard Case
should still be synced . If you power-off your iPad Tablet you may need to
re-sync . If you use the Bluetooth Keyboard Case with a new iPad Tablet,
or it doesn’t connect properly, follow the steps above to re-sync .
Note: the Bluetooth Keyboard Case will automatically go into standby
mode after 15 minutes of non-use in order to preserve battery life.
Just press any key to reactivate the keyboard.
79
71
95
_I
N
S
0
91
1_
B
lu
et
oo
th
K
ey
bo
ar
d
C
ol
or
s
W
x4
.7
5”
H
_O
ut
pu
t:1
00
%
_P
rin
ts
:1
/1
,B
lk
