ADD DEVICE
1. Make sure phone is connected to your
Wi-Fi network and that it is a 2.4GHz network
and Bluetooth is turned on in your phone
settings.
2. Plug in the LED Strip into a USB port that has
power. If the lights start blinking fast they are
in set up mode and you can proceed to step 3.
If they are not blinking fast, press and hold
the on/off button down for 5-7 seconds and
let go. Lights should then start to blink fast
and then they are in set up mode.
3. From the home screen of the App, press the
(+) symbol in the top right corner.
