6. When “Big Blue Unplugged” is selected, the LED RING
will be solid blue, the pairing successful tone will sound
to confirm pairing is complete, and the USER LED will be
solid.
Notes:
• To cancel the pairing mode, either press the POWER/
PAIRING BUTTON, a tone will sound and the speaker will
turn off, or wait 2 minutes for the speaker to cancel pairing
automatically. The LED RING will return to solid blue and
the unit will remain on.
• The LED RING will dim and the USER LED INDICATOR
will turn off after 5 seconds after pairing. Pressing any
button will only activate the USER LED INDICATOR and
LED RING at high brightness for 5 seconds. Press
button again for operation.
PAIRING YOUR DEVICE WITH NFC
1. Enable your device for NFC pairing. Refer to your
device’s owners manual for details if necessary.
2. Press the USER BUTTON until the desired USER LED
INDICATOR is illuminated. The USER LED INDICATOR
will blink slowly if it has been previously paired with a
device and then solid when the device is found, or it
will flash rapidly indicating no device was previously
paired to that User.
3. Touch your device to the speaker's NFC SENSOR.
Confirm the connection on your device. The USER
LED will be solid.
Note: The LED RING will dim and the USER LED INDICATOR
will turn off after 5 seconds after pairing. Pressing any button
will only activate the USER LED INDICATOR and LED RING at
high brightness for 5 seconds. Press button again for operation.
12
13
