Brookstone 856165 Massage 1, Быстрое руководство

Страница: 5 / 8

7 8
LOCATION OF CONTROLS
(CONTINUED)
CONTROLLER
NECK
1. / NECK nodes Up/Down Control Buttons
Long Press these buttons to manually adjust Neck massage height.
2. / NECK nodes Direction Control Buttons
Press once to start, press 2 nd time to reverse direction
Press to start auto reversing program
BACK
3. Back Massage Coverage
Full, Upper or Lower Back.
4. SHIATSU Button
To activate/deactivate a rolling, rotating massage.
Note: Does not work with ADJUST button.
5. Adjust Button
To adjust the width of the nodes during the rolling massage.
6. Rolling Button
To activate/deactivate a sooth massage with a steady,
up-and-down rolling motion. Use with the ADJUST
button to select roller width.
7. Heat Button
To activate/deactivate gentle heat at NECK and BACK node area.
8. Target Button
To stop and focus traveling massage nodes at desired position.
1
2
4
6
8
9
10
11
5
7
3
SEAT
9. Air Compression, Dynamic Squeeze, Button
To activate/deactivate the seat and lumbar air squeeze function on thighs and waist. 3 pressure
strengths are selectable.
10. Massage Button
To activate/deactivate SEAT Vibration Massage Program (Low, Medium, High).
11. Power Button
Power ON/OFF must be ON for any function to work. Switching off the power while in operation
will cause the rollers to return to their storage position.
REMOVE FROM BOX
1. Remove Massage 1 from Box. Ensure all parts are present (see page 6).
2. Unbuckle the storage strap by pressing the center silicone square tab while very
carefully pulling the front metal housing.
3. When your Massage 1 is not in use and you are ready to store it in the future, use
the strap to fold the seat up into the unit and secure it. (As it was when you
opened the box for the first time), As shown on page 6.