SET-UP
1. Open the Bluetooth Keyboard Case completely and pull the Tablet Security Tab
out from the frame.
2. Slide your Tablet into the Frame so that its screen is facing out of the Frame, its
power button is accessible, and the cameras are lined up with their ports.
3. Tuck the Tablet Security Tab back in behind your Tablet.
4. Use the Keyboard in its original position, or move it forward to gain a better angle
of the Tablet's screen. Magnets hold the Keyboard secure in either position.
CHARGING THE KEYBOARD
1. Plug the charging cord (included) into the Charging Outlet (located at the Control
Panel on the Keyboard) and into a USB outlet.
2. The Charging LED illuminates red during charging, and shuts off when charging
is complete.
3. The Keyboard takes approximately 2.5 hours to charge for up to 70 hours of use.
Note: The Power LED indicator will blink when the Keyboard’s battery
needs recharging.
5
Charging Outlet
Power Button
Bluetooth LED
Power LED
Charging LED
Caps Lock LED
1. Open the Bluetooth Keyboard Case completely and pull the Tablet Security Tab
out from the frame.
2. Slide your Tablet into the Frame so that its screen is facing out of the Frame, its
power button is accessible, and the cameras are lined up with their ports.
3. Tuck the Tablet Security Tab back in behind your Tablet.
4. Use the Keyboard in its original position, or move it forward to gain a better angle
of the Tablet's screen. Magnets hold the Keyboard secure in either position.
CHARGING THE KEYBOARD
1. Plug the charging cord (included) into the Charging Outlet (located at the Control
Panel on the Keyboard) and into a USB outlet.
2. The Charging LED illuminates red during charging, and shuts off when charging
is complete.
3.
Note: The Power LED indicator will blink when the Keyboard’s battery
needs recharging.
6
SYNCING THE BLUETOOTH
®
KEYBOARD TO YOUR
TABLET
1. Power on your Tablet.
2. To turn on the Keyboard, press and hold the Power Button. Both the Bluetooth
LED and the power LED will light up for a few seconds, and then the Bluetooth
LED will begin to flash.
3. Select the Settings icon on your Tablet’s screen and then “Bluetooth” in its menu.
4. Under Bluetooth “Devices”, select “Bluetooth Wireless Keyboard”.
5. Your Tablet will now prompt you to enter a 4-digit password, followed by the
Enter/Return key, on the Bluetooth Keyboard Case’s keyboard.
6. Your Tablet screen should now show the Bluetooth Keyboard has
connected successfully.
7. The Power LED will remain illuminated while the Keyboard is powered on.
8. To turn off the Keyboard, press and hold the Power Button. The Power LED will
turn off.
9. If your Tablet goes into standby mode, the Keyboard should still be synced. If you
power-off your Tablet you may need to re-sync. If you use the Keyboard with a
new Tablet, or it doesn’t connect properly, follow the steps above to re-sync.
Note: The Keyboard will automatically go into standby mode after 15 minutes
of non-use in order to preserve battery life. Just press any key to reactivate
the Keyboard.
81
568
4_
IN
S_B
luetoot
h
K
ey
bo
ar
d
Ca
se
for
iPa
d
mi
ni
T
abl
et
s
W
x4
.75
”H_Output:10
0%
_P
rints
:1
/1
,B
lk
815684_INS_Bluetooth Keyboard Case for iPad mini Tablet.indd -- BACK of Sheet 3 of 3 -- Pages (6,7) -- Wed Nov 21 2012
815684_INS_Bluetooth Keyboard Case for iPad mini Tablet.indd -- BACK of Sheet 3 of 3 -- Pages (6,7) -- Wed Nov 21 2012
