Brookstone 842364, Инструкция по эксплуатации

Страница: 11 / 24

9
842364_INS_Pocket Projector Slim Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk
OPERATION
CHARGING THE PROJECTOR
1 . The projector is charged using the included
Micro USB to USB cable .
IMPORTANT:
Fully charge the Projector’s internal
battery before first use (approximately 4-5 hours).
The projector's approximate run time on battery
power is 3.5 hours (when fully charged).
2 . The projector has 4 indicator lights . The lights
will flash in turn as the device charges . Device
is fully charged when all 4 lights are lit and no
longer flash .
3 . To check the projector’s battery, press the
power button . The amount of battery remaining
will be indicated by the number of indicator
lights that are lit . For example, if only one light
is lit the projector’s battery is low . In this case,
connect the power adapter and charge the
projector promptly to avoid the automatic power
off when the battery runs low .
ATTENTION: The projector may become warm
during operation. This is a normal process of heat
emission which will not impact the operation
of the projector.