9
using THe
12
V poWer ouTleT
1. Open the Charging Panel 2 Cover.
2. Plug the 12V Car Adapter into the 12V Power Outlet.
3. Connect to device to be powered (up to 200W).
replacing the fuse: If the 12V Output isn
’
t operational, check the fuse and,
if fuse is blown (burned out), replace it with a 30A fuse.
IMPOrtANt: Only a 30A fuse should be used.
using THe jump sTarTer
1. Open the CABLE DOOR.
2. Take out the RED and BLACK clamps.
3. Unscrew the BLACK nut from the negative terminal.
4. Connect the ring on the BLACK wire to the negative terminal.
5. Screw the BLACK nut back on the negative terminal to secure wire.
6. Unscrew the RED nut from the positive terminal.
7. Connect the ring on the RED wire to the positive terminal.
8. Screw the RED nut back on the positive terminal to secure wire.
9. Clamp the BLACK clamp to the negative pole of the car battery first followed
by the RED clamp to the positive pole of the car battery. This unit is able to
output a current of 200A.
WArNINg! fire or explosion may be caused because of a short circuit
or wrong connections of the poles.
