12
NOTE:
• Push the Throttle Stick slowly .
• If the aircraft begins spinning or deviating, use the Trimmer Buttons to correct the
problem .
• To avoid injury, fly the aircraft a minimum of 6 feet (2 meters) away from yourself and
others .
• Do not look straight into the lights, as the lights may generate laser radiation .
• If the controller or aircraft batteries are becoming depleted, the control distance and
height of flying will be affected .
• If the aircraft becomes damaged, do not use it until it is repaired .
• To prolong the aircraft's useful life, avoid crashes, especially from a high altitude .
• Avoid flying when there is more than a light wind .
• After flight, turn off the remote control and the aircraft, and remove the batteries to
avoid battery leakage .
USING THE TRIMMER BUTTONS
To ensure that your drone can fly straight and level, you must trim the aircraft . Trimming
consists of calibrating the movements of your drone so it remains stable both in takeoff
and in flight . If your drone drifts slightly in one direction, press the trimmer buttons in the
opposite direction .
NOTE: It is best to make final trim adjustments when the craft is airborne .
GROUND EFFECT
When the aircraft's blades swirl, the aircraft becomes unstable . This is referred to as the
Ground Effect . The Ground Effect is more pronounced with lighter weight aircraft .
13
HEADLESS MODE
When the power is turned on, normally the front of the drone is the
end with the LED lights, and the right and left directions are based
on that orientation . You can change this default orientation using
Headless Mode . With Headless Mode, the end of the drone closest
to the controller is the back of the drone, regardless of where the
LED lights are . The right and left directions are determined by the
controller's location rather than the LEDs .
To enter Headless Mode, press the Headless Mode button . A tone
will sound and the two front LED lights will flash, indicating that
Headless Mode has started .
To exit headless mode, press the Headless Mode button again . A
tone will sound and the LED Indicator light is solid .
Front
Front
Front
Front
Front
Front
Left
Right
Left
Left
Right
Left
Left
Right
Right
Right
Left
Right
Back
Back
Back
Back
Back
Back
Front
LOW BATTERY ALERT
When the aircraft's battery is becoming depleted, the front two LED lights continuously
flash slowly . Land the drone and replace the batteries as soon as possible . The drone may
be difficult to control with low batteries .
