7
6
PAIRING WITH BLUETOOTH
®
1. Prepare your device (e.g., smartphone) to pair using Bluetooth
®
, making sure that
the device is within 33 feet of the headphones. Refer to your device's owner’s
manual for information on using the Bluetooth
®
function.
2. Slide the Power Switch to the ON position (down). The Bluetooth
®
Indicator
quick flashes blue, indicating that the headphones are in pairing mode.
3. On your device, search the list of available devices and select Noise Cancel
Headphones. Note that it may take a few seconds for the headphones to be
listed as an available device. Depending on your device, you may have to tap
SCAN to update the device list. Consult your device's owner's manual.
4. If prompted, type the password or PIN 0000.
5. When the devices are successfully paired, the Bluetooth
®
Indicator glows solid
blue.
Once paired, the devices will remain paired, even after being turned off, until you
delete the connection.
To pair the headphones with another device, press and hold the Multi-Function
Button (MFB) for more than 5 seconds to re-enter the search state, then repeat
Steps 3 through 5 above. You can reconnect with the previous device at a later time
without repeating the pairing step.
To delete all Bluetooth connections, press ANC and VOL + at the same time for
more than 5 seconds. Remember to remove the Noise Cancel Headphones from the
connections list on your device. To reconnect you will have to repeat the pairing step.
NOTE: You can also use your headphones without a Bluetooth
®
connection. See
Page 8.
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Brookstone is under license.
OPERATION
1. Slide the Power Switch to the ON position (down).
2. The ANC Indicator glows green, indicating that the Active Noise Cancelling
(ANC) function is activated. To turn off ANC, press the ANC Button.
3. Position the headphones on your head. Note that the headphones are marked
with R and L, indicating the right and left ears. Position accordingly.
4. Adjust the headband for a comfortable fit. Ensure that the headphones properly
cover your ears to achieve the best noise reduction.
5. To play music:
6. To answer calls:
Function
Button
Answer a call
Press the MFB when there is an incoming call.
Reject a call
Press and hold the MFB.
End a call
Press the MFB while in a call.
Function
Button
Play/pause music
Press the MFB.
Next song
Double-click the MFB.
Replay current song
Triple-click the MFB.
Volume up
Press Vol +. Hold Vol + to continue to increase volume. A tone
sounds when the maximum volume, as set on your device, is
reached.
Volume down
Press Vol -. Hold Vol - to continue to decrease volume. A tone
sounds when the minimum volume is reached.
