USB CONNECTOR/
OTG CONNECTOR
USB END OF
CHARGING UNIT
EARBUD END OF
CHARGING UNIT
CHARGING THE BATTERY
Charge the battery for at least 8 hours before first use. After charging, the
device can be used without the power connection.
If the device is not used for a long period of time, the battery may require
recharging. A tone sounds twice per minute when the battery is low.
To charge the battery:
1. Plug the USB connector into a USB port on an active device. (If the
Micro USB connector is extended, press the blue button and push in
the Micro USB connector to retract it.)
2. Place the USB end of the magnetic charging unit and the earbud end
of the magnetic charging unit together. The Charging Indicator turns
red during charging. The indicator turns off when the earbuds are fully
charged.
7
6
CHARGING WITH THE OTG CONNECTOR
The On The Go (OTG) Connector offers an alternative way to charge the
battery, using a Micro USB port.
To charge the battery using the OTG Connector:
1. On the back side of the USB/OTG Connector, press up on the small
blue recessed line to extend the Micro USB connector, and press up
on the second blue line to fully extend the Micro USB connector. The
blue button will pop into its slot when the connector is fully extended.
2. Insert the Micro USB connector into a Micro USB port in a device that
supports the OTG charging function.
3. Place the USB end of the magnetic charging unit and the earbud end
of the magnetic charging unit together. The Charging Indicator turns
red during charging. The indicator turns off when the earbuds are fully
charged.
4. To retract the Micro USB, press in on the blue button and press down
on the Micro USB connector.
CHARGING INDICATOR
