CHARGING A USB DEVICE
1. Connect your smartphone or other USB
device using the built in Micro USB or
Lightning
®
cable, or the other USB cable
to the USB output jack on the battery.
* This battery should only be used with
compatible electronic equipment.
Please check the specifications of
your device to ensure it is safe to
charge with this battery.
2. Press the POWER button on the battery.
3. Once your smartphone or Lightning
®
device is charged, make sure to
disconnect the device.
Note: The maximum charging output for this
battery is 2.4 amp and 2.4 amp, which is
designed for charging Lightning
®
devices
and most smartphones at the same time.
CHECKING BATTERY STATUS
The LED light will illuminate when the
POWER button is pressed to show the
charge capacity left in the battery.
LED light stays on for 3 minutes: 100%-26%
LED light flashing once every second:
25%-11%
LED light flashing 3 times every 5 seconds:
10%-1%
LED light flashes 2 times every second when
the battery is below 1% capacity.
TROUBLESHOOTING
Q. No LEDs illuminate while
attempting to charge my device.
A. You need to refer to the device
you are charging for battery level
status in that device.
Q. The battery gets warm while
charging or discharging.
A. This is a common result of
charging and discharging of
energy. The heat is not enough
to affect devices adversely.
SPECIFICATIONS
Ensure your device can be safely
charged from this type of power source.
Capacity: 12000mAh
Input: DC5V-2A (max)
Lightning
®
Port Output: 2.4A
Micro USB Port & USB Port Output: up to 2.4A (max)
LOCATION OF PARTS AND
CONTROLS
1. Micro USB Input Jack
2. LED Power Indicator
3. Power Button
4. USB Output Jack up to 2.4A (max)
5. Lightning
®
Output Cable 2.4A
6. Micro USB Output Cable up to 2.4A (max)
7. Micro USB Cable
5
1 3 4
6
2
7
