14
15
PAIRING YOUR DEVICE
1. Prepare your device to pair using Bluetooth
®
technology,
making sure the device is within 33 feet of the speaker.
Refer to your device’s owners manual for details if
necessary.
2. Press and hold the POWER/LIGHT BUTTON on the
speaker for 3 seconds or press the POWER BUTTON
on the remote until the BLUETOOTH LED turns on and
starts flashing. The speaker will announce “Bluetooth”
then “Waiting for Connection.”
3. Select “Eluma Cube Speaker” on your device. If
prompted, use 0000 as a PIN for the pairing code.
4. When “Eluma Cube Speaker” is selected, the
BLUETOOTH LED will be solid blue and the speaker will
announce “Bluetooth Connected”.
5. To pair a different device, press the PAIRING BUTTON
on the remote. The BLUETOOTH LED will flash and the
speaker will announce “Bluetooth Disconnected” then
“Waiting for Connection”. Follow steps 3 and 4 to pair the
device.
CHARGING THE SPEAKER
1. Lift the port cover and insert the MICRO USB CHARGING
CABLE into the MICRO USB IN PORT on the speaker.
Plug the MICRO USB CHARGING CABLE'S USB
connection into the included USB ADAPTER or into the
USB port on your computer. The speaker will be fully
charged in approximately 8 hours.
2. The CHARGING LED INDICATOR is RED while the
speaker is charging. When the speaker is fully charged,
the CHARGING LED INDICATOR turns off. For first
time use, fully charge the speaker.
3. When the battery is low, the speaker will announce “Low
Battery.”
REMOTE CONTROL SET UP
Remove the insulator tab under the REMOTE CONTROL
BATTERY COMPARTMENT.
