Brooks Firetracker FT420, Техническое руководство

Страница: 61 / 78

Technical Manual
FT420
– Iss 2.4
61
4.2.2 Installing Configuration Tool
A) Updating Existing config. software to V2.3.2
When upgrading your PC with config. software version V2.3.2, all previous PC software versions must
be uninstalled. Follow these steps to uninstall previous revisions:
1. Start -> Control Panel -> Programs and Features
2. Select FT420 Configuration Tool V2.x from the list
3. Select Uninstall/Change
4. Press OK on the opened dialog box
After uninstalling the old version, install V2.3.2 either with a CD or memory stick:
5. Look for
the file named “FT420 Config V2.3.2.zip” on the CD or memory stick and
6. Unzip the file
to a folder named “FT420_Config V2.3.2” on the PC.
7. Then run the Setup.exe file from the FT420_Config folder.
8. This will automatically install the software on the PC.
9. To launch the software, go to
START>Brooks FT420> FT420 Configuration Tool -- V2.3.2
B) New Installation of config. software V2.3.2
To install V2.3.2 from either a CD or memory stick:
1. Look
for the file named “FT420 Config.zip” on the CD or memory stick and
2.
unzip it to a folder named “FT420_Config” on the PC.
3. then run the Setup.exe file from the FT420_Config folder. This will automatically install the software
on the PC.
4. To launch the software, go to:
START>Brooks FT420> FT420 Configuration Tool -- V2.3.2
Note: Ensure that the correct COM port matches the PC. To do this, launch the FT420
Configuration Tool software. Click on the pull down menu named “Port” to select the
appropriate COM port. See Figure 32.
Figure 32 COM Port Selection
4.2.3 Saving, Recalling and Downloading SSD files
To save an SSD setup file for future use:
1. Click
on “File->Save” then
2. Select a location in the PC to save the SSD file.
To load an SSD setup file: Select
“File-> Open”.
To start a new SSD setup: C
lick on “File->New”.