2022/01/06
FT128 Quick Operation Guide
Page
3
of
6
7 - TO MANUALLY RE-ENABLE AN ALARM POINT FROM THE MENU:
1. Press
Button.
2. Key Enter Access Code.
3. Scroll to the
Disable
or re-enable
menu (
H2
) by pressing
or
button/s then press
to Accept
a. RE-ENABLE SINGLE POINT
i
Scroll to the
Re-enable address
menu (
B5
) by pressing
or
button/s then
press
to Accept.
ii
The disabled address will be displayed or type address number as required, then
press
to Accept
b. RE-ENABLE WHOLE ZONE
iii
Scroll to the
Re-Enable zone
menu (
B6
) by pressing
or
button/s then
press
to Accept.
iv
The disabled zone will be displayed or type in the zone number as required, then
press
to Accept
4. Press the
Button repeatedly until the menu returns to the date / time screen. +
8 - TO CHECK EVENT LOG:
1. Press
Button.
2. Key Enter Access Code.
3. Scroll to the
Present System Status
menu (
H4
) by pressing
or
Button/s then press
to Accept
4. Scroll to
Disablement
menu (
U1
) by pressing
or
Button/s then press
to Accept
5. Scroll to
Event Log
menu (
U6
) by pressing
or
Button/s then press
to Accept
6. Select event Log: 0=Alarm, 1=Interlocking, 2=General, then press
to Accept.
The most recent event is shown in the top of the list
9
– CHECK THE CURRENT SOFTWARE VERSION OF THE MAINBOARD
1. Press
Button.
2. Key Enter Access Code.
3. Scroll to the
Present System Status
menu (
H4
) by pressing
or
Button/s then press
to Accept
4. Scroll to
Version and Alarm Counter
(U7) by pressing
or
Button/s then press
to
Accept
5. Press the
Button repeatedly until the menu returns to the date / time screen.
