Brooks BARFS-1 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 50

background image

Owner's Manual

BARFS-1 Rev 2.1.1

48 of 50

14

PRODUCT GUARANTEE

Brooks Australia Pty Ltd guarantees the  BARFS-1 control panel for a period of either fifteen (15)
months from the date of purchase or twelve (12) months from the date of installation, whichever is
the lesser. Brooks Australia Pty Ltd. Guarantees the smoke/heat Alarms for five years from date
of purchase. If a product has any defect due to faulty workmanship or material it will upon return to
Brooks be repaired or replaced free of charge.

If the control panel or any smoke/heat alarm should become defective within the guarantee period,
it  must  be  returned  to  Brooks  Australia,  with  proof  of  purchase,  carefully  packaged,  with  the
problem clearly stated. Brooks shall at its discretion repair or replace the fault unit. If returning the
complete product all accessories and documentation MUST be returned.

This guarantee only applies to normal conditions of use and service, and does not cover damage
caused to the product or its components as a resulting from accident, neglect, misuse, unauthorized
dismantling, or contamination howsoever caused, incorrect installation, careless handling or where
repairs  have  been  made  or  attempted  by  others.    On  site  warranty  repairs  are  not  part  of  this
guarantee.  This guarantee excludes incidental and consequential damage. This guarantee does
not cover costs associated with the removal and/or installation of alarms.

No  other  guarantees  written  or  verbal  are  authorised  to  be  made  on  behalf  of  Brooks.  All  other
conditions and warranties whether expressed or implied are, to the extent permitted by law, hereby
excluded.

As Brooks has no control over the system's design, installation to the relevant Australian Standard
or maintenance, the Company and its agents take no responsibility for any damage, financial loss or
injury caused to any equipment, property or persons resulting from the use of the BARFS-1  SYSTEM

Do not interfere with the Alarm or attempt to tamper with it. This will invalidate the guarantee, but
more importantly may expose the user to shock or fire hazards. This guarantee is in addition to
your statutory rights as a consumer.

«
...
46
47
48
49
50
»

Содержание BARFS-1



















































Отзывы:

Нет отзывов

Похожие инструкции для BARFS-1

Бренд: Water Hero Страницы: 28

Бренд: Dantel Страницы: 42

Бренд: Truweld Equipment Страницы: 28

Бренд: DAITEM Страницы: 22

NAC-HD-329VL/60

Бренд: Navaio Страницы: 2

Origo Arc 4001i

Бренд: ESAB Страницы: 24

Бренд: König Страницы: 51

RIS 700PE EKO 3.0

Бренд: Salda Страницы: 36

Бренд: jablotron Страницы: 2

Бренд: ADEMCO Страницы: 40

Бренд: Bircher Reglomat Страницы: 24

Бренд: Naked Страницы: 12

Бренд: jablotron Страницы: 2

Бренд: dallmeier Страницы: 44

Бренд: Cambridge SoundWorks Страницы: 11

Бренд: Maxocam Страницы: 7

Бренд: auna multimedia Страницы: 17

Бренд: ESAB Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды