Brooks ALARM 2000, Руководство по эксплуатации сайта

Страница: 14 / 70

Site Manual
Alarm 2000 Iss 5
14
Controls:

Alarm Locate - silences all Smoke / Heat Alarms except the Alarm(s) that have
actuated. Used to locate the source of the fire or a faulty or contaminated Smoke /
Heat Alarm. Automatically resets after approximately five (5) minutes.

Alarm Isolate - silences all Smoke / Heat Alarms. Used to silence the units while
smokes, cooking fumes or steam are cleared from the Smoke / Heat Alarm.
Automatically resets after approximately five (5) minutes.

Sounder Silence - mutes the integral RFIP fault sounder. Automatically resets to
normal after fault condition is cleared.
Key Switch:

AUTO - system 'ON', set for automatic alarm response.

OFF - system 'OFF', charger 'on', system off output activated.
Note: A red indicator on the front panel adjacent the key switch will flash to
provide a local warning to the occupants that the system has been turned
'OFF'. A signal output is provided for remote monitoring of this condition.

FIRE - all Smoke/Heat Alarms sound, alarm outputs selected activate.
Indicators:

Mains ON, green LED, steady

System OFF, red LED, flashing

Alarm Activated, red LED, flashing

Alarm Output Fault, amber LED, steady

MCP Input Fault, amber LED, steady

Alarm Locate selected, amber LED, steady

Alarm Isolate selected, amber LED, steady

Sounder Silence selected, amber LED, steady

Power Supply Fault
– optional, amber LED, steady