Safety
MagnaTran 7.1 User’s Manual
Mechanical Hazards
MN-003-1600-00
Brooks Automation
2-6
Revision 2.2
Mechanical Hazards
The Brooks Automation MagnaTran 7 robot is a complex electromechanical device.
Only persons with the proper training should attempt to service or operate the robot.
All power to the robot must be disconnected as outlined in the facilities’ lockout/
tagout procedure before servicing, or injury may result from the automatic operation
of the equipment. The proper precautions for operating and servicing remotely con-
trolled electro-mechanical equipment must be observed. These precautions include
wearing safety glasses and any other precautions specified within the facility where
the robot is being used.
DANGER
Moving mechanisms have no obstruction sensors and can cause seri-
ous personal injury or death.
Whenever power is applied to the robot the possibility of automatic
movement of the robot arms exists, which could result in personal
injury.
Ergonomic Hazard - The MagnaTran 7 Drive weighs 29.5 kg (65 lbs.) 3 axis or
21 kg (46.5 lbs.) 2 axis. Failure to take the proper precautions before moving
it could result in personal injury.
Moving Parts Present- Do not operate the robot without the protective covers
in place or personal injury could result in the squeezing or compression of
fingers or hands between moving parts.
HEAVY LIFTING
PINCH POINT
