- 4 -
Before Installation
Before Installation
Installation
Installation
Please read these instructions carefully before installing the LumaWarm.
Failure to do so may result in damage to the product.
1) Remove Toilet Seat
a) Lift hinge covers and use a screwdriver to
remove the mounting bolts.
b) Remove the toilet seat.
Steps may vary by type of seat.
1) Removing Existing Toilet Seat
2) Installing The Product
a) Insert the adjustable Mounting Bolts into
appropriate grooves on the bottom of
the LumaWarm (US for United
States & EU for European).
b) Insert the Mounting Bolts through the
toilet mounting holes.
c) Adjust the seat by sliding it forward or
backward along the track to obtain
optimum position over the toilet bowl.
d) Insert Rubber Washer, Plastic Washer
and Plastic Wing-nut, from under the
toilet, onto each Mounting Bolt and fasten
until snug (repeat process on the other
side).
e) Use the Wrench to assist with tightening
the Plastic Wing-nut if necessary.
2) Installing the LumaWarm
!
!
!
!
Unscrew nut
Remove
Seat
1. Rubber Washer
2. Plastic Washer
3. Plastic Wing-nut
1
2
3
3)
Installing the
LumaWarm (alternate)
Insert mounting bolts
into toilet fixture holes
Items required but NOT included: Screwdriver, wrench.
Be sure that all parts are on hand before proceeding with the installation.
Under normal circumstances, tools are not required for the installation process.
However, some toilet bowls may be designed with hard to reach areas, in which case,
a screwdriver and wrench may be required.
Some toilet fixtures are designed with
only top-side access. To install the
LumaWarm onto these types of
fixtures, an Alternate Mounting Kit is
required.
To get a set of the Alternate Hardware,
order online at www.brondell.com or
call 1-888-542-3355
