14
6.4
RFS Interface
The RFS interface of the power packs Topas A in the RFS version can be switched
on/off. The procedure is described in chapter 9.
6.5
Remote control channels
The remote control can only be used with the power packs Topas A RFS and is effected
by radio over the separate channels (studio workstations). The procedure is described
in chapter 9.
6.6
Power pack addresses
The assignment of addresses by radio to each unit is only possible with the power
packs Topas A RFS. This allows individual operation within the same studio
workstation. The definition of the unit addresses is described in chapter 9.
6.7 Sync
socket
Synchronous cables art. no. 34.111.00 or 34.112.00 may be plugged into the socket to
release flashes via cable.
6.8 „Test“
key
The key (7) allows manual release of the power pack (see chapter 7.1).
7. Flash ready signals visual/audible
7.1
The visual ready signal
is the green LED at the "test" key (7). It lights up only when the unit is fully charged to
the set flash energy.
After a flash, the power display (15) of the occupied lamp base outlets blink and the
LED goes out and lights up again when the unit is fully charged once more.
