Heated Grip
The Installation Guide
*Please check each component is included in the package before you go through.
Check all componets
Control Box - 1 PC
Clamp.Top - 1 PC
Clamp.Bot - 1 PC
3M Tape - 1 PC
Heat Grip - 1 PAIR
ConnectorWire - 1 SET
Hex.Screw - 2 PCS
SelfTap.Screw - 4 PCS
Thumb Heater - 1 SET
V 1.2
* Damage can occur due to the wrong installation or incorrect wiring.
If you are unsure please ask your local dealer for assistance.
Wiring Connect Guide
<*Fuse>
_Postitive Input DC12 V
_Ground wire / to vehicle body
<Thumb Heater>
* Damage can occur due to the wrong or inappropriate assembling of the Control Unit.
If you are unsure please ask your local dealer for assistance.
Control Box Assembling
Screw on Handle-Bar
Attach to body / surface
< OR >
Turn back for operation instruction.
<Connector Wire>
<Thumb Heater Wire>
* To avoid insufficient voltage regulation or potential damage and to avoid Battery
drain it is beneficial to wire the grips to shut off when power supply to vehicle is turned off.
