10
1300 276 642
bromicrefrigeration.com.au
5. OPERATION
Start-up
• Connect the appliance to the mains power supply and check that the compressor,
electronic controller, lighting and all fans are functioning correctly.
• The compressor and condenser fan should operate should operate 3 minutes after the unit
has been connected to the power supply.
• The evaporator fan should operate after the unit has been plugged in.
• The electronic controller will display the current cabinet temperature after the unit has
been connected to the power supply.
• The LED indicates that refrigeration circuit is operating.
• During the start-up delay (3 minutes), the LED is flashing
Setting the temperature
NOTE:
The controller is factory set at 4°C. The controller is programmed to control cabinet
temperatures between 2 to 8°C.
Controller settings are locked to maintain correct temperature conditions for vaccine products and
can only be changed by Bromic authorised service agents.
Operating the light
i. Set the
0-1
switch to the
‘1’
position.
