1300 276 642
www.bromic.com/refrigeration
7
5. OPERATION
Start-up
• Connect the appliance to the mains power supply and turn on the main switch (blue) by
flipping it upward.
• Switch on the Heating (for Warm showcase) and Lighting switches, and check that the fan
(for Warm showcase) and lighting are working correctly.
• The electronic controller will display the current cabinet temperature after the Heating
switch is turned on (for Warm showcase).
• Make sure the unit is clear of obstructions on all sides, and the electrical cable is not
touching the external surface of the appliance, as the sruface can be hot during operation.
Setting the temperature (For Warm showcase)
i. Press the button for more than 3 seconds.
ii. The value of the set point will be displayed and the ‘°C’ or ‘°F’ LED starts blinking.
iii. Press or arrow key within 10 seconds to adjust the set point.
iv. Press the key again or wait 10 seconds.
Handling (For Warm showcase)
WARNING
: Appropriate PPE (Personal Protective Equipment) must be worn when
using the warm showcase cabinet. High surface temeprature inside the cabinet may
cause severe injury.
WARNING
: Untrained personnel are not allowed to operate the cabinet due to
safety risk related to high surface temperature.
