BROMECH ATP ASP, Руководство по эксплуатации

Страница: 10 / 16

Rev:Y2,August,2020 ATP_ASP Price Computing Scales Operation Manual
- 6 -
5. OPERATION
Initial Start-up
Warm-up time of 15 minutes stabilizes the measured values after switching on.
1. Power ON/OFF
Power switch is located below the right side of the scale.
Turn the scale ON; press the switch forward and hold. The scale will show the
capacity and enter a self-test mode and follow to enter the weighing mode.
Turn the scale OFF, press the switch forward once.
2. Zero
Environmental conditions can lead to the balance exactly zero in spite
of the pan not taking any strain. However, you can set the display of
your balance to zero any time by pressing key and therefore
ensure that the weighing starts at zero.
3. Tare
The weight of any container can be tared by pressing button so that
with subsequent weighing the net weight of the object being weighed is
always displayed.
1 Load weight on the pan.
2 Press key. Zero is displayed, and tare is subtracted.
3 Remove weight from the platform. Tared weight is displayed. It can set only
one tare value. It can display with a minus value.
4
Press key. Zero is displayed, tare weight is cleared.
4. Weighing Units
Press key in the weighing mode to change the weighing units
kg / lb.