Brolight BIM-7001, Руководство пользователя, Страница: 12 / 18

DOCID#: CD-M-BIM-7001D
U S E R M A N U A L
- 10 -
10) Button right
（
1
）
In setting up/low limits of the power mode, short press this key can increase the power value,
and long press it can quickly increase the power value. In Reading memory data mode, short press this
key can read the next data that the memorizer has stored. In setting wavelength mode, short press this
key can read the next wavelength that the memorizer has stored.
（
2
）
In measuring mode, long pressing this key (Until a "beep" is heard), that means it enters Factory
data reset node. The wavelength, the up/low limit value are all back to the factory default Settings
4.2.3 The default Settings
The initial settings are as follows, please refer to form 4-2
Function Default
ZERO/REF ZERO
AUTO_BL closed
AUTO_OFF closed
HOLD closed
ATT closed
SAVE closed
DELETE closed
mw/dBm W
λ It is determined by the type
of the detector
MODE Absolutely measuring mode
MODE(Reading the date
device) The latest data which was
saved by memorizer
MODE
（
Power Limit
）
It is determined by the type
of the detector
MODE(Power Max) It is determined by the type
of the detector
Form4-2
BIM-700X Start the default Setting
4.2.4 Display mark
Signs Instruction
---- It is detecting whether it has
connected the detector
nC No Connector
nA The detector without attenuation,
without attenuation is Invalid
EP No data in memorizer
FULL The memorizer has been full
OL Exceed the range.
Erro Error operating