Broil King IN-GROUND POST BL48G-2, Руководство пользователя, Страница: 11 / 32

B102250-1-0714 Page 11
24 3/4
”
ABOVE GRADE
GAS SUPPLY LINE
1. Dig a posthole approximately 12" in diameter and 28 3/4" in depth at the desired grill location.
Note: "Normal Installation" height is achieved when the top of the 48" post is 24 3/4" above ground. This
height provides a cooking surface height of approximately 34" above ground when grids are placed in the
high level.
2. Carefully lower the in-ground post into the hole using the following guidelines:
• The upper rectangular cut-out is located near the top of the post and should be above ground
after installation.
• The rectangular cut-out must face in the same direction as the front of the grill.
• Hole depth and post measurements should be checked to ensure desired height.
Note: Make any adjustments at this time.
3. Prepare concrete or a standard pre-mix according to the manufacturer's package directions. Position
the 48" post in the center of the hole. A level should be used when aligning the post to achieve precise
vertical alignment. Hold the post in place while pouring the concrete mixture into the hole around the post.
Keep concrete below gas line hole.
CONCRETE OR
STANDARD
PRE-MIX
SOIL GRADE
Check Local Codes for requirements
concerning buried gas lines.
PLACE POST IN GROUND