1.
2.
INSTALLATION INSTRUCTIONS
4.
3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the control panel
and the dashboard, to widen the gap. Open the glove compartment. Press the curved edge on the left part of the
ProClip into the gap below the gap opener.
2. Flip the ProClip rightward/forward so the left curved edge hooks under the frame surrounding the control panel.
Pull out the gap opener.
3. Press the gap opener into the gap between the glove compartment and the dashboard and hold it in the gap.
Press the right part of the ProClip leftward, toward the center console sidewall. Then press forward/upward so the
grooved edge goes into the gap below the gap opener. Press until you hear/feel it snaps into place. Pull out the
gap opener. Close the glove compartment.
4. The ProClip is in place.
