27 May, 2020, www.brodit.com, © 2020 Brodit AB
Product 727002
727002 Active holder for fixed installation Fits for devices with original skin. With tilt swivel.
This holder is equipped with a cable for fixed installation for charging of your device. It provides a discreet and
neat installation without any visible cables. 12/24 Volt. The product is E-approved. Connect the power cable with
a 2 A fuse. 2 A charger. Professional installation recommended. The holder is mounted onto a tilt swivel so you
can adjust the angle and switch between portrait and landscape mode.
Tablets should not be installed onto a car’s dashboard if they block the view or block key controls. The ProClip is
designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet
onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine
if such an installation is possible in the specific case. Consideration should be given to the position and how firmly
the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations
for such installations.
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit
recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick
charge).
EAN: 7320287270020
Item no 727002 fits:
Samsung Galaxy Tab Active 2. SM-T390/SM-T395 (For all countries)
