1.
2.
INSTALLATION INSTRUCTIONS
4.
3.
Please read all of the instructions and look at the pictures before attaching the holder.
1. To adjust the holder to fit for your device with or without skin: Loosen the screws on the front side of the holder
slightly. Pull out the sides of the holder slightly. Place the device in the holder and press the sides together so the
device is firmly in place. Remove the device carefully without changing the position of the sides. Tighten the
screws on the front side of the holder.
2.To install the holder: Loosen the screw in the center of the holder so you can remove the tilt swivel attaching
plate on the back.
3. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed
screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw
until the holder is firmly in place, but still can be adjusted.
4. The holder is in place.
