manualshive.com logo in svg

Brodie BiRotor B061A, Руководство по установке и эксплуатации

Поделиться
Скачать
Brodie BiRotor B061A Скачать руководство пользователя страница 5

Page 5/37

IOM BiRotor 3” to 6” R03

Although measurement transducers are not specifi -
cally included in the MID regulations as they do not 
form a complete measuring (system) instrument ref 
Article 1 and 4, Annex I and Annex MI-005. 

Brodie Meter Co., LLC implements the same stringent 
regulations for all products and tests to the same 
standards which are used for complete (systems) 
instruments.

The complete system must contain all the necessary 
components to meet the requirements of the local 
regulations. These components may include, pumps, 
air eliminators, strainers, valves, fl ow computers, etc.

The unit must be sealed in accordance with the local 
regulations; it is the end users responsibility to ensure 
this happens.

Flow measuring devices are provided with two labels 
which specify fl ow ranges. The name plate label which 
includes the factory serial number; details the op-
erating fl ow range, this is the fl ow range the device 
will operate within without causing damage, and the 
custody transfer label; this label details the working 
fl ow range associated with a particular weights and 
measures approval. 

It should be noted that these may not be the same; 
therefore in trade applications the fl ow ranges speci-
fi ed on the custody transfer label should be followed.

Essential Instructions for Measuring Equipment Including the Euro-
pean Union (Directive 2004/22/EC MID)

Essential Instructions for Electrical Equipment Including the Euro-
pean Union (Directive 2004/108/EC and 2004/22/EC)

This unit contains Electrostatic sensitive circuit 
boards. Electrostatic safety precautions should be 
taken to prevent damage.

When connecting wiring it is good practice to use 
shielded cable. The shield should be connected to 
earth at the read out or control systems end of the 
cable; the other end of the shield should not be con-
nected. 

This wiring practice is mandatory in order to comply 
with the requirements for electromagnetic compati-
bility as per the EMC directive 2004/108/EC and MID 
2004/22/EC of the council of the European Union.

It is the end users responsibility to ensure that all pro-
tective covers are in place to prevent electrical shock 
and/or personnel injury.

Содержание BiRotor B061A






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды