broda WC-19 Скачать руководство пользователя страница 8

 

Note that removing and attaching the footrest may be easier for the caregiver with the brakes applied 

 

Failure to follow these instructions will unnecessarily increase the risk of serious falls by residents, caregivers, or 

third parties caused by the chair unintentionally moving. 

 

2.5.5

 

39B

Re-Positioning of Resident - “Danger of Clamping” 

Broda chairs offer the benefits of seat tilt, back recline, leg rest/footrest elevation, and moveable arms. During the 

movement of any of these functions, the following safety measures must be observed: 

 

1)

 

The resident’s arms must be positioned on the armrests or inside the chair frame with their hands 

on their body. 

2)

 

The resident’s feet must be correctly positioned on the footrest. 

3)

 

All of the chair’s brakes have been applied. 

4)

 

Only one caregiver at a time attempts to operate the chair’s functions. 

5)

 

Only one chair function is operated at a time. 

6)

 

The rear wheels are in the trailing position, behind the chair frame. 

7)

 

The residents’ and caregivers’ body are clear of all pinch points before operating the chair’s 

functions. 

 

Failure to follow these safety measures can put the residents’ or caregivers’ limbs at risk of injury. Residents who 

may be unaware of their body position or unable to maintain a safe body position are at the most risk of the danger 

from clamping and caregivers should be more cautious with these residents. A second caregiver may be required to 

ensure the safety of these residents during these operations. 

 

2.5.6

 

40B

Unintended Movement - “Danger of Falling or Collision” 

We recommend Broda chairs for indoor use within a long-term care institution and where there is not enough slope 

to cause the chairs to move unaided. Chairs used where the surface is uneven or sloped are at risk of unintended 

movement and could become a serious danger to the resident, caregiver(s), or a third party. We recommend that 

Broda chairs are located away from stairwells, elevators, and exterior doorways within a long-term care institution. 

 

Outdoor use is appropriate only under the strict supervision and full attention of a caregiver who is physically 

capable of preventing any unintended movement over any surfaces that are to be traveled on. We recommend that a 

second caregiver assist when the chair is moved over surfaces that could cause significant unintended movement.  

 

2.5.7

 

41B

Resident Clothing - “Risk of Injury to Resident’s Skin” 

We recommend that residents only be seated while they are fully dressed in clothing that meets the needs of their 

specific condition. If after being fully dressed, a resident’s bare arms, legs, or body could still come into direct 

contact with the vinyl straps or vinyl pads, we recommend the use of a covering, such the Broda terry cloth covered 

seat and/or back pad or a folded cloth bed sheet to prevent direct contact. Direct contact of bare skin on the straps 

over a period of time could cause moisture on the resident, and/or cause the skin to stick to the straps. Prior to the 

operation or movement of a chair with a covering, the caregiver must ensure any covering placed on the chair does 

not come into contact with any moving parts and is securely placed, so not to slip. 

 

2.5.8

 

42B

Improper Restraint Use - “Risk of Serious Injury” 

We recommend that alternatives to physical restraints be used with residents while seated in the chair except under 

the specific instructions of the resident’s primary caregiver and with permission of the resident’s family or guardian. 

Physical restraints have been identified as a common cause of serious injury to residents while they are seated. We 

recommend that the primary caregiver responsible for seating first consider the re-positioning options available in 

the chair to reduce the risks of sliding, falling, or self-injury. 

 

If a physical restraint is determined to be appropriate to prevent sliding or falling out of the chair, we recommend 

that the Broda thigh belt be used. If a physical restraint is determined to be appropriate to prevent self-injury from 

resident movement, we recommend the Broda HSP padding package. In all cases, it is the resident’s primary 

caregiver that must take responsibility for the safety of the resident if restraints are used. 

 

 

Содержание WC-19










































Отзывы: