9
2.3
Height Adjustable Armrests - Optional
The Aspire Pediatric Glider offers standard fixed height
armrests. Optional height adjustable armrests can easily
be adjusted in order to accommodate various individuals.
The armrest height should be adjusted to provide correct
arm support for the child as determined by the caregiver.
To Adjust the Armrest Height:
-
Squeeze the pins together which are located under the
armrest flap.
WARNING
:
DO NOT place fingers at the top of the
pins as this could cause pinching. Place fingers in the
concave shape of the pins.
-
Raise or lower the arm to the desired height.
WARNING:
DO NOT place fingers anywhere
underneath the arm while adjusting, as this could
cause pinching
. Upon releasing the pins the armrest
height will lock into place.
Secure the outside flap on the side panel. Change the
height on the other arm as desired.
2.4
Transport Wheels
The Aspire Pediatric Glider has two rear transport
wheels for ease of transporting the chair while
unoccupied.
To Transport the Chair:
-Apply the caregiver lock.
-Standing directly behind the chair, tilt the chair back
onto the transport wheels and transport to the desired
location.
-Once the chair is in the desired location and in the
upright position, the caregiver lock may be released if
desired.
WARNING: Do not transport the chair while it is
occupied.
2.5
Accessories (Options)
It is recommended that only BRODA accessories are used on the Aspire Pediatric Glider. The correct installation of
the BRODA accessory is very important. We recommend that the chair is ordered with the required accessories
already installed. Only authorized caregivers who thoroughly understand the accessory installation procedures
should attempt to install their BRODA accessories without assistance from their local BRODA representative.
BRODA does not recommend use of other manufacturer’s accessories on our chairs.
1
!
2
