Brock SSM 1001 WH, Руководство пользователя

Страница: 5 / 23

BROCK
ELECTRIC HOT PLATE
EP 100 WH, EP 100 BK, EP 200 WH, EP 200 BK
IMPORTANT SAFEGUARDS
When using any electrically powered product, basic safety precautions should always be
followed, including the following:
Please read all instructions carefully before using the product.
Warning - to reduce the risk of fire, electrical shock or injury to persons or property:
Always operate the product from a power source of same voltage, frequency and rating as
indicated on the product identification plate.
Close supervision is necessary when the product is used by or near children or invalids. Do not
allow children to use it as a toy.
Do not operate any product with a damaged cord or plug, or after the product malfunctions, or is
dropped or appears damaged in any way. Return the complete product to the place of purchase
for inspection, repair or replacement.
To reduce the risk of electric shock, do not immerse or expose the product or flexible cord to rain,
moisture or any liquid other than those necessary for correct operation of the product.
This product should not be used in the immediate vicinity of water, such as bathtub, washbowls,
swimming pool etc. Where the likelihood of immersion or splashing could occer.
Do not operate or place any part of this product on or near any hot surfaces(such as a gas or
electric burner or hot plate or in a heated oven).
Switch off and unplug from outlet when not in use, before assembling or disassembling parts and
before cleaning remove by grasping the plug-do not pull on the cord.
NB! Hot surface! Avoid contacting hot surfaces!
Do not use the appliance for other than its intended use.
Do not leave the appliance unattended when switched on.
Using attachments or accessories not recommended or sold by the product distributor may
cause personal or property hazards or injuries.
This product is intended for normal domestic/household use only.
HOW TO USE HOT PLATE
Before using your hot plate for the first time, turn the hot plate on the highest setting for 3 to 5
minutes to condition the protective coating.this should be the only time the hot plate is turned
on without a cooking utensil on it.
GB