Brocade Communications Systems SilkWorm 3800, Справочник по аппаратуре, Страница: 40 / 62

A-4 SilkWorm 3800 Hardware Reference
Product Specifications
A
General Specifications
Table A-4 lists the general specifications for the SilkWorm 3800.
Table A-4 General Specifications
Specification Description
Configurable port types F_Port, FL_Port, and E_Port
EMC (electromagnetic
compatibility) Emissions
An operating SilkWorm 3800 conforms to the emissions
requirements specified by the following regulations:
•
FCC Rules & Regulations, Part 15 subpart B, Class A
•
CISPR22 Class A
•
EN55022 Class A
•
VCCI Class A ITE
•
AS/NZS 3548 Class A
•
CNS13438 Class A
•
ICES-003 Class A
Immunity
•
IEC 61000-4-2 Severity Level 3 for Electrostatic
Discharge
•
IEC 61000-4-3 Severity Level 3 for Radiated Fields
•
IEC 61000-4-4 Severity Level 3 for Fast Transients
•
IEC 61000-4-5 Severity Level 3 for Surge Voltage
•
IEC 61000-4-6 Conducted Emissions
•
IEC 61000-4-11 Voltage Variations
System architecture Non-blocking shared-memory switch
System processor Intel 80960VH, 100 MHz CPU
ANSI fibre channel protocol FC-PH (Fibre Channel Physical and Signalling Interface
standard)
Modes of operation Fibre Channel Class 2, Class 3, Class F
Fabric initialization Complies with FC-SW 5.0
FC-IP (IP over fibre channel) Complies with FC-IP 2.3 of FCA profile
Aggregate switch I/O bandwidth 64 Gbit/sec if all 16 ports running at 2 Gbit/sec, full duplex
Port to port latency Less than 2 microseconds with no contention (destination port
is free)