Brocade Communications Systems SilkWorm 3800, Справочник по аппаратуре, Страница: 11 / 62

SilkWorm 3800 Hardware Reference 1-3
Introducing the SilkWorm 3800
1
Monitoring and Managing the SilkWorm 3800
Managing the SilkWorm 3800
You can use the management functions built into the SilkWorm 3800 to monitor the fabric
topology, port status, physical status, and other information to aid in performance analysis and
system debugging.
You can manage the SilkWorm 3800 using any of the management options listed in Table 1-1.
Only one telnet session can be active at a time on the SilkWorm 3800.
Note: For information about upgrading the version of Fabric OS installed on the switch, refer
to the Brocade Fabric OS Procedures Guide.
* Requirements for running IP over fibre channel:
•
Must be run on both HBA and switch.
•
Must be supported by both HBA and HBA driver.
Table 1-1 Management Options for SilkWorm 3800
Management Tool Out-of-band
Support In-band
Support
Command line interface
Up to two admin sessions and four user sessions at same
time. For more information, refer to the Brocade Fabric OS
Procedures Guide and the Brocade Fabric OS Reference.
Ethernet or
serial
connection IP over fibre
channel *
Brocade Fabric Manager
For information refer to the Brocade Fabric Manager
User’s Guide.
Ethernet or
serial
connection IP over fibre
channel *
Brocade Advanced Web Tools
For information refer to the Brocade Advanced Web Tools
User’s Guide.
Ethernet or
serial
connection IP over fibre
channel *
Standard SNMP applications
For information refer to the Brocade MIB Reference.
Ethernet or
serial
connection IP over fibre
channel *
Management server
For more information, refer to the Brocade Fabric OS
Procedures Guide and the Brocade Fabric OS Reference.
Ethernet or
serial
connection Native inband
interface
(over HBA only)
Brocade SCSI Enclosure Services
For more information, refer to the Brocade SES User’s
Guide.
Not supported SCSI over fibre
channel