Brocade Communications Systems NetIron MLXe Series, Руководство по установке оборудования

Страница: 275 / 305

Electromagnetic approvals
• FCC Part 15, Subpart B (Class A)
• EN 55022 (CE mark) (Class A)
• EN 55024 (CE mark) (Immunity) for Information Technology Equipment
• ICES-003 (Canada) (Class A)
• AS/NZ 55022 (Australia) (Class A)
• VCCI (Japan) (Class A)
• EN 61000-3-2
• EN 61000-3-3
• EN 61000-6-1
Port specifications for all router models
This section describes port specifications for all router models.
2x100GbE CFP2 Dynamic Port Configuration
The dynamic port configuration is shown for the 2x100GbE CFP2 based high density blade chassis.
Dynamic port configuration for the 20x10/1GbE based high density blade chassis is shown in the following table.
TABLE 54 20x10/1GbE Module Dynamic Port Configuration
# Ports Line Speed SFP Type Configuration Status Port Speed Status
20 1GbE SFP 1GbE Supported
10GbE SFP+ 10GbE Supported
10GbE SFP 10GbE Not Supported
1GbE SFP+ 1GbE Not Supported
10GbE SFP+ 1GbE Not Supported
Console port pin assignments
The console port is a standard male DB-9 connector, as shown in the following figure. For information about how you can use this port,
refer to
Console port on page 31.
FIGURE 124 Console port pin and signaling details
Port specifications for all router models
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04 275