Brocade Communications Systems IronWare, Руководство по выпуску, Страница: 35 / 40

IronWare Software Release 02.7.03a for Brocade BigIron RX Series Swtches
Release Notes v 1.0 Page 35 of 40
Defect ID: DEFECT000279523 Technical Severity: Medium
Summary: The LED status on the Web-GUI LED for the 16x10GE module is transposed between the odd and
even ports.
Feature:
Web Management
Function:
FRONT PANEL
Reported In Release: RX 02.7.03
Defect ID: DEFECT000279728 Technical Severity: Medium
Summary:
Multicast traffic is flooded on all ports when IGMPv3 snooping enabled.
Symptom: Multicast traffic is flooded on all ports.
Probability: Medium
Feature:
IPv4 MC-Snooping (VLAN)
Function:
IGMPv3 Snooping
Reported In Release: RX 02.7.02 Service Request ID: 240868
Defect ID: DEFECT000279953 Technical Severity: Medium
Summary: STP BPDUs may be dropped across the Q-in-Q link
Probability:
Medium
Feature: L2 Protocol Function: STP
Reported In Release:
RX 02.7.02
Service Request ID:
238581
Defect ID:
DEFECT000281680
Technical Severity:
Medium
Summary: SNMP GET on The SNMPEngineTime does not return the correct system uptime.
Symptom: SNMP GET on The SNMPEngineTime does not return the correct system uptime.
Probability:
Medium
Feature: SNMP Management Function: Trap/Notification
Reported In Release:
RX 02.7.02
Service Request ID:
242084
Defect ID: DEFECT000281762 Technical Severity: Medium
Summary:
IPv6 Traps are not sent if an IPv4 address is not configured on the XMR/MLX or RX.
Symptom: Configure IPv4 address and then configure IPv6 address.
Probability:
Medium
Feature: SNMP Management Function: Trap/Notification
Reported In Release: RX 02.7.02 Service Request ID: 241172
Defect ID: DEFECT000281788 Technical Severity: Medium
Summary:
Remove CLI command for packet logging. This feature is not supported on RX.
Symptom: CLI command for packet logging is non-functional. This feature is not supported on RX.
Probability: Low
Feature: CLI Infrastructure Function: Page Mode Display
Reported In Release: RX 02.7.02 Service Request ID: 241827
Defect ID: DEFECT000283672 Technical Severity: Medium
Summary:
BGP speaker does not advertise update to origin AS
Symptom: Customer wanted to advertise eBGP update received from a router in AS <N> to a different router in
AS <N> . This design is supported on the MLX but is currently not available on the RX.
Probability:
High
Feature: BGP Function: BGPv4
Reported In Release: RX 02.7.02 Service Request ID: 243183