Brocade Communications Systems ICX 7250-24, Руководство по установке оборудования, Страница: 53 / 98

Configuring the Device
● Configuration tasks......................................................................................................... 53
● PC or terminal attachment.............................................................................................. 54
● Password assignment..................................................................................................... 54
● IP address configuration................................................................................................. 56
● Connecting network devices........................................................................................... 60
● Troubleshooting network connections.............................................................................62
● Testing connectivity.........................................................................................................63
DANGER
The procedures in this manual are for qualified service personnel.
Configuration tasks
Follow the steps listed in the following table to configure the device. Details for each of these steps are
provided on the pages indicated.
Configuration tasks TABLE 11
Task number Task Where to find more information
1 Attach a terminal or PC to the device. This will enable you to
configure the device through the command line interface
(CLI). PC or terminal attachment on page
54
2 No default password is assigned to the CLI. For additional
access security, assign a password. Password assignment on page 54
3 Before attaching equipment to the device, you must configure
an interface IP address to the subnet on which the device will
be located. Initial IP address configuration is performed using
the CLI with a direct serial connection. IP address configuration on page
56
4 Once you power on the device and assign IP addresses, the
system is ready to accept network equipment. Configuring IP parameters for
devices running Layer 3 software
on page 58
5 Test IP connectivity to other devices by pinging them and
tracing routes. Testing connectivity on page 63
6 Continue configuring the device using the CLI. You can also
use Brocade Network Advisor to manage the device. FastIron Ethernet Switch
Administration Guide
7 Secure access to the device. FastIron Ethernet Switch
Administration Guide
Brocade ICX 7250 Switch Hardware Installation Guide 53
53-1003622-02