background image

Copyright © 2012 Brocade Communications Systems, Inc. All Rights Reserved.

Brocade, Brocade Assurance, the B-wing symbol, BigIron, DCX, Fabric OS, FastIron, MLX, NetIron, SAN Health, ServerIron, 
TurboIron, VCS, and VDX are registered trademarks, and AnyIO, Brocade One, CloudPlex, Effortless Networking, ICX, NET Health, 
OpenScript, and The Effortless Network are trademarks of Brocade Communications Systems, Inc., in the United States and/or in 
other countries. Other brands, products, or service names mentioned may be trademarks of their respective owners.

Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning 
any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to 
this document at any time, without notice, and assumes no responsibility for its use. This informational document describes 
features that may not be currently available. Contact a Brocade sales office for information on feature and product availability. 
Export of technical data contained in this document may require an export license from the United States government.

The authors and Brocade Communications Systems, Inc. shall have no liability or responsibility to any person or entity with 
respect to any loss, cost, liability, or damages arising from the information contained in this book or the computer programs that 
accompany it.

The product described by this document may contain “open source” software covered by the GNU General Public License or other 
open source license agreements. To find out which open source software is included in Brocade products, view the licensing 
terms applicable to the open source software, and obtain a copy of the programming source code, please visit 

http://www.brocade.com/support/oscd

.

Содержание Brocade M6505











Отзывы: