background image

14

20. WARRANTY

ONE YEAR LIMITED WARRANTY FOR BROAN ELITE PRODUCTS

Venmar Ventilation ULC warrants to the original consumer purchaser of Broan Elite products that such products will be free from defects 
in materials or workmanship for a period of one year from the date of original purchase. LED modules and LED driver are also covered 
by this warranty for a period of one (1) year. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT 
LIMITED TO, IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

During this one-year period, Venmar Ventilation ULC will, at its option, repair or replace, without charge, any product or part which is 
found to be defective under normal use and service.

THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS, TUBES, HALOGEN AND INCANDESCENT BULBS, 
FUSE, FILTERS, DUCTS, ROOF CAPS, WALL CAPS AND OTHER ACCESSORIES FOR DUCTING. This warranty does not cover 
(a) normal maintenance and service or (b) any products or parts which have been subject to misuse, negligence, accident, improper 
maintenance or repair (other than by Venmar Ventilation ULC), faulty installation or installation contrary to recommended installation 
instructions.

Warranty service is to be completed by an authorized Service Center designated by Venmar Ventilation ULC. Where applicable, in-
home service will be made available only in areas where a contracted service provider offers service. If in-home service is not available, 
the product will be repaired or replaced, at Venmar Ventilation ULC's discretion, by the nearest authorized service provider. The unit 
removal and reinstallation works are under the customer responsibility, and Venmar Ventilation ULC cannot be charged for them.

The duration of any implied warranty is limited to the one-year period as specified for the express warranty. Some provinces do not allow 
limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

VENMAR VENTILATION ULC’S OBLIGATION TO REPAIR OR REPLACE, AT VENMAR VENTILATION ULC’S OPTION, SHALL BE 
THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. VENMAR VENTILATION ULC SHALL NOT BE 
LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH PRODUCT 
USE OR PERFORMANCE. Some provinces do not allow the exclusion or limitation of incidental or consequential damages, so 
the above limitation or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights, which vary from one province to another. This warranty 
supersedes all prior warranties.

To qualify for warranty service, you must (a) notify Venmar Ventilation ULC at the address or telephone number stated below, (b) give 
the model number and part identification and (c) describe the nature of any defect in the product or part. At the time of requesting 
warranty service, you must present evidence of the original purchase date.

Venmar Ventilation ULC

, 550 Lemire blvd. Drummondville, QC J2C 7W9 www.broan.ca 1-877-896-1119

19. OPERATION 

(CONT'D)

HC0073

A

B

1) LED lighting knob
2) Blower operation indicator
3) ON/OFF blower switch
4) Blower speed control knob

HC0035

1

3

2

4

A) LED lighting knob
B) Blower speed control knob

COOKTOP LIGHTING

The LED lighting of this hood is controled by a rotary dimmer switch (

1

). The lighting turns on at high intensity, and decreases as the knob 

is turned clockwise. 

NOTE: When the light switch is turned on, there is a short delay before the lighting turns on; this short delay is normal.

If you experience lighting intensity issues after using the main power switch, cutting the power at service panel, or following a power 
outage, turn the lighting to off by rotating the rotary dimmer switch counterclockwise until you hear a clik, and try again. 

BLOWER

The blower is operated using two controls.
Use the on/off rocker switch (

3

) to start and stop the blower. When turned on, the blower indicator (

2

) turns on and the blower operates at 

the previous setting of the speed control (

4

).

Turn the speed control knob clockwise to increase blower speed – counterclockwise to decrease speed.

Содержание E60000LC SERIES

















Отзывы: