1. Disengage the small grease guard cups from the grease guard by turning counterclockwise and remove.
2. Remove the screw retaining the grease guard to the hood.
3. Remove the grease guard from the hood. Then remove the bottom panel.
4. Unscrew the clips and remove the wheel grease collector.
5. Remove the wheel center cap.
6. Loosen the wheel set screw in order to disengage the wheel from its motor shaft.
Let soak for 3
0
minutes all removed parts in warm water with soft soap. Then wash with nylon brush, rinse and dry completely before
reinstalling.
NOTE:
When reinstalling the wheel, align the end of the set screw with the flat part of
the motor shaft (
A
).
Here is the meaning of the symbols drawn on the rocker switches:
The circle means OFF.
The single line means ON for lamp and power switches, and
means low speed for blower switches
The double line means high speed.
S
WITCHES
1.
Light switch.
2.
Left and right blower speed switches.
3.
Power switch.
MAINTENANCE
CONTROL
1
2
3
6
5
4
1
2
3
A
HD
0
142
HD
0
143
HD
0
144
HD
0
145
HD
0
146
HD
0
147
HD
0
148
HC
00
1
9
-7-
