MODEL 353SOBK
Page 3
6. Working from inside the attic, find the center of the
selected solar panel location identified in step 2, drill a
small hole in the roof decking large enough for the solar
panel wire to fit through.
7. Feed the solar panel wire through the hole into the attic.
8. Run a bead of silicone or roof cement around the
perimeter of the underside of the solar panel and secure
to the roof using nails or screws. Nail or screw all corners
and perimeter of base every 6 inches. Seal the fastener
heads with silicone or roof cement.
9. From inside the attic, apply silicone around the wire
where it enters the roof.
10. Connect the red wire to the positive motor terminal and
the black wire to the negative motor terminal. Tape or
tie extra wire to prevent contact with the fan blade.
11. Remove cardboard from the solar panel and verify that
the ventilator operates.
REMOTE SOLAR PANEL
INSTALLATION
Model
Key
355RSOBK
No.
(Black)
Description
1
S99527255
Solar Panel Assembly
2
S99527261
Fan Blade w/ Set Screw
3
S99527257
Motor, DC
4
S99527250
Roof Sheet Panel
1
2
3
4
SERVICE PARTS
Replacement parts
can now be ordered
on our website.
Please visit us at
www.Broan.com
