Broadxent CW2200, Руководство пользователя

Страница: 23 / 59

3. Setting Up Ethernet / WLAN Client
15
3.3 Checking Connection with the Router
You can use the Ping command to verify whether or not your
Ethernet/Wireless client has successfully connected to the
Wireless Broadband Router.
To execute ping command, open the DOS window and ping the IP
address of the router at the DOS prompt. For example:
ping 192.168.1.1
If the following response occurs:
Reply from 192.168.1.1 bytes=32 time=100ms TTL=253
Then the connection between the Wireless Broadband Router and
the network has been successfully established.
Otherwise, if you get a failed ping with the response of:
Request time out
Then the connection is fail. Verify your network setting is correct.
For Ethernet client, also check the cable between the router and
the PC.