Page
3
of
4
4.
Slide the Driver Side Moun
ti
ng Bracket through the slot cut in the middle of the splash guard and posi
ti
on the
Bracket up to the front moun
ti
ng loca
ti
on. Bolt the Bracket in posi
ti
on as described in
Step 3
.
Repeat this step
for passenger side Moun
ti
ng Bracket installa
ti
on. Snug but do not
ti
ghten hardware at this
ti
me.
5.
Select the driver side Top Bracket and slide it through the opening in the factory grille,
(Figure 5)
.
6.
Bolt the Top Bracket to the ex
isti
ng hole on the top radiator support with the included (1) 8mm x 25mm Hex
Bolt, (2) 8mm Flat Washers and (1) 8mm Nylon Lock Nut,
(Figure 5)
. Do not
ti
ghten hardware at this
ti
me.
Repeat this step for driver side Top Bracket installa
ti
on.
7.
With assistance, posi
ti
on the Grille Guard up to the inside of the Moun
ti
ng Brackets. A
tt
ach the Grille Guard to
the Moun
ti
ng Brackets with the included (4) 12mm x 30mm Hex Bolts, (8) 12mm Flat Washers and (4) 12mm
Nylon Lock Nuts,
(Figure 6)
. Do not
ti
ghten hardware at this
ti
me.
8.
Align hole in the passenger side Top Bracket with hole in the Grille Guard plate.
Attach
the Top Bracket to the
Grille Guard with the included (1) 10mm x 25mm Bu
tt
on Head Allen Bolt, (2) 10mm Flat Washers and (1) 10mm
Nylon Lock Nut,
(Figure 7)
. Repeat this step for driver side Top Bracket installa
ti
on. Do not
ti
ghten hardware at
this
ti
me.
(1) 8mm x 25mm Hex Bolt
(2) 8mm Flat Washers
(1) 8mm Nylon Lock Nut
Fig 5
Front
Fig 6
Front
(2) 12mm x 30mm Bolts
(4) 12mm Washers
(2) 12mm Nylon Lock Nuts
