manualshive.com logo in svg

Broadcom Symantec S550, Руководство по установке, Страница: 47 / 49

Поделиться
Скачать
Broadcom Symantec S550 Скачать руководство пользователя страница 47

 

Symantec

™

 Endpoint Detection and Response 4.5 Installation Guide for the S550

appliance

/dev/disk1 (internal, virtual):

   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS SymMacSOE              +499.0 GB   disk1
                                 Logical Volume on disk0s2
                                 DDDDFDA9-6016-4FD7-8815-B4C1D7190788
                                 Unlocked Encrypted

/dev/disk2 (disk image):

   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     Apple_partition_scheme                        +24.2 MB    disk2
   1:        Apple_partition_map                         32.3 KB    disk2s1
   2:                  Apple_HFS Flash Player            24.2 MB    disk2s2

/dev/disk3 (external, physical):

   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *2.0 TB     disk3
   1:                        EFI EFI                     209.7 MB   disk3s1
   2:                  Apple_HFS BackupMcBackface        2.0 TB     disk3s2

/dev/disk4 (external, physical):

   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                            CDROM                  *15.9 GB    disk4

M021204TKG3QD:Downloads john_doe$ diskutil unmountDisk /dev/disk4
Unmount of all volumes on disk4 was successful

9. Plug the USB stick into the USB port.
10. Boot to the device.

To boot to the device

11. Follow the installer.

To follow the installer

To boot to the device
This procedure is the same for DVD or USB stick.

12. Press 

CTRL-D 

at the beginning of the BIOS. This task puts the USB device first in the boot order and the HDD

second.

13. To switch from customer mode, type the password 

manuok

.

14. In the confirmation dialog, type 

Y

 (for Yes).

The host boots from the device and the grub menu appears.

To follow the installer

 

47

Содержание Symantec S550


















































Отзывы:

Нет отзывов