Broadcom Symantec PC-S200, Быстрый старт

Страница: 5 / 5

PC - S200
5
PolicyCenter
Quick Start Guide
Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does not assume
any liability arising out of the application or use of this information, nor the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. (2021.08.24, 13:16:14)
Install the PC - S200 into the Rack
To install the appliance into a 2- or 4-post rack with fixed-
mount brackets:
1. Attach the fixed-mount brackets to the appliance:

Align the brackets with the screw holes in the appliance
sides. The brackets are symmetrical and can be
installed on either side.

Secure the brackets with the included M4x6 flathead
screws, four on each side. Do not over tighten.
2. Install the appliance into the rack:

Find a rack location with enough space to mount the
PC - S200 (1U of space), near the network hardware and
power source.

Insert the appliance into the rack and secure it with four
rack screws, two on each side.
3. Reconnect the cables as documented in Connect Cables
and verify the appliance is functioning as in Power On the
Appliance and Verify LEDs .
See below for support and additional documentation.
Symantec Technical Support

For Symantec technical support, case management,
licenses, and product downloads, go to:
support.broadcom.com/security
PolicyCenter Software Documentation

Go to
techdocs.broadcom.com
and type “policy” in
the search field, then click PolicyCenter .
Appliance Documentation

S Series WebGuide (Maintenance and Upgrades)
techdocs.broadcom.com/sseries

S200 Series Safety and Compliance Guide
techdocs.broadcom.com/s200